Personnel Fire Escape Chute , Fast Residential Emergency Escape Slides

Personnel Fire Escape Chute , Fast Residential Emergency Escape Slides

Fire Escape Chute Introduction

• This escape chute is about personnel escape systems for buildings and tall structures. For escape systems for large vehicles, see Evacuation slide.
• An escape chute is a special kind of emergency exit, used where conventional fire escape stairways are impractical. The chute is a fabric (or occasionally metal) tube installed near a special exit on an upper floor or roof of a building, or a tall structure. During use, the chute is deployed, and may be secured at the bottom by a fire fighting crew some distance out from the building. Once the tube is ready, escapees enter the tube and slide down to a lower level or the ground level.
• Outside layer: fiberglass or polyester which can afford high temperature more than 800 degree. It is one of the best fire-proofing and inflaming material.
• Interlayer: Aluminum-foil is good at heat insulation and dissipation, which can prevent smoke from permeating.
• Inlayer: The escape chute is made up of polyester and static wire which can avoid spark created by static cause of constantly working.
• Guided sliding sleeve is made from special rubber, anti-aging.
• Gliding speed is about 1.5m/s, safety enough. Cushion in the end of the slide can protect person from falling down.

Fire Escape Chute Main technical parameters

Escape chute type:

escape chute is the door to escape the lives of the victims in the fire. Because opportunities are reserved for people who are prepared. In the event of fire, there is an escape chute, and the people in the building can escape from the scenein the first place. According to the different building or the use of different places, choose different types of suitable escape chute set with the following four kinds. High rise building window escape chute

High rise building window escape chute

Outdoor type: It is usually a stainless steel storage bracket combination box placed in the house near the window. When it is used urgently, first open the stainless steel storage box and lift the slide frame out of the window, then put the escape chute (cloth bag) outlet into the room. The slide frame frame hole relies on the slide down force, and the slide slide to the ground can complete the evacuation of the person.

Indoor series type escape slide

Corridor, platform type escape chute: first make the house corridor and balcony make a 75*75 cm square hole, each floor is fitted with the floor height matching escape chute. When emergency occurs, as long as the operating mechanism is pulled, stored in the stainless steel storage tank in each floor of the escape chute will automatically droop to each lower floor. Evacuate the affected people quickly and safely from dangerous areas.

Spiral escape chute

1. Indoor, outdoor, common, and mobile devices are available for selection. No space is used to affect the original space.
2. Any floor in any location can be installed within the ccc range.
3. Convenient operation and rapid escape of 22 people per minute, the weight of 35-125Kg old and weak women and children can be used.
4. When using the escape slide, you will not see the scene above the ground without fear.
5. Escape chute, the outer layer is made of flame retardant material forever, and it can delay the invasion of fire tongue when it escapes.
6. The escape chute has high safety and can withstand more than 2000Kg.
7. The outer layer is affixed with luminous precautions and operating instructions, and can be used clearly in the dark.
8. The escape chute is designed according to the principle of physical gravity, and does not need to use electricity to rely on its own gravity.
9. The escape slide adopts vertical type without occupying space, and does not need a wide square.

fire escape chute

fire escape slide

Personnel Fire Escape Chute , Fast Residential Emergency Escape Slides Images